loading...

This image represents a finished sample approximately 600mm wide. Colours displayed on your screen may differ from those of the actual sample. This veneer is made from natural wood so its appearance may vary and have natural features.

Woodstock Lichen Tulipwood

Veneer:

Woodstock Lichen Tulipwood

Cut:

Crown-cut

Only available in Crown-cut

Matching:

Slip-matched

This veneer is normally either Book-matched or Slip-matched (Slip-matching is recommended to avoid a striped "paling-fence" effect). An alternative for large areas of panelling is Random-matching/Colour-blending.
How to Specify: Download
Nominal veneer leaf size(s): Lengths generally 2500mm up to 3100mm and sometimes 3400mm. Widths - various
Typical Finished Panel size(s): 2400mmx1200mm, 2700mmx1200mm, 3000mmx1200mm, sometimes 3300mmx1200mm
Thickness of Veneer: 0.5mm - 0.6mm
Product Data Sheet: Download
Availability: Good availability
Price zone: Above average
Applications: Not to be used on exterior or wet areas, or ultra-high-wear areas or floors. Keep out of direct sunlight.
About & Applications information: Download
Colour/Appearance: Pale/Blond/Golden
- Is a dyed veneer. Reasonably consistent in colour, grain may vary.
Consistency of Appearance: Better than average
Species: Tulipwood
Botanical Name: Liriodendron tulipifera
Origin: USA
Handling and Care instructions Download
Edging & solid timber availability: Veneer edging is generally available from Briggs Veneers. Matching solid wood is not available.
Finish: This veneer should be finished with a non-yellowing clear coating, such as a 2-pack Acrylic Urethane, with manufacturer approved UV inhibitors
Pressing, Finishing & Fabrication information Download
Environmental: Sustainably managed, non-endangered
Environment Health & Safety information Download
Available as environmentally certified: May be available as FSC® certified - please contact Briggs Veneers to discuss.
Emissions from raw veneer: Zero Formaldehyde emissions (E0) and zero VOC's from raw veneer. To maintain E0 rating, specify E0 substrate and glue, and E0 water based low-VOC coating clear coat.
Formaldehyde certificate Download
Material Safety Data Sheet Download
Fire Hazard Group 2 when glued onto 12mm and thicker FLAMEBLOCK LIGHT FRMDF and FLAMEBLOCK FRMDF Download Fire Hazard Group 2 certificate
Fire Hazard Group 3 when glued onto 12mm and thicker MDF, MRMDF and BLACK MRMDF. Download Fire Hazard Group 3 certificate

This/these fire certificate(s) apply only for the MDF, species, veneers, laminates and thicknesses as listed on the certificates. Please confirm with your fire consultant that these certificates meet the relevant BCA requirements for your application (interior walls and ceilings Class 2 to 9 Buildings).