![]()
This image represents a finished sample approximately 600mm wide. Colours displayed on your screen may differ from those of the actual sample. This veneer is natural wood so its appearance may vary and have natural features.
Grey Ironbark (Quarter-cut)
Species: |
Grey Ironbark |
Cut: |
Quarter-cut
Crown-cut may also be available, please contact us |
Matching: |
Book-matched
This veneer is normally Book-matched. Slip-matching is recommended to avoid a striped "paling-fence" effect in Quarter-cut. An alternative for large areas of panelling is Random-matching/Colour-blending. |
| How to Specify: |
Download |
| Nominal veneer leaf size(s): |
Lengths generally 2500mm up to 2800mm. Widths - various |
| Typical Finished Panel size(s): |
2400mmx1200mm, 2700mmx1200mm |
| Thickness of Veneer: |
0.55mm - 0.65mm |
| Product Data Sheet: |
Download
|
| Availability: |
Reasonable availability |
| Price zone: |
Slightly above average |
| Applications: |
Not to be used on exterior or wet areas, or ultra-high-wear areas or floors. Keep out of direct sunlight. |
| About & Applications information: |
Download
|
| Colour/Appearance: |
Dark-brown/Red
- Ranges from pale brown to greyish-brown, reddish-brown or greenish-brown and to dark chocolate brown or dark red. May be figured or plain. |
| Consistency of Appearance: |
Considerably less than average |
| Other names: |
Ironbark |
| Botanical Name: |
Eucalyptus paniculata |
| Origin: |
NSW, Queensland |
| Handling and Care instructions |
Download
|
| Edging & solid timber availability: |
Veneer edging can be made by/is available from edge-band manufacturers. Solid wood may have limited availability. Note that edging, even if the same species as the face veneer, may not necessarily look the same as the face veneer. |
| Finish: |
This veneer is best finished with a non-yellowing clear coating with manufacturer approved UV inhibitors |
| Pressing, Finishing & Fabrication information |
Download
|
| Environmental: |
Sustainably managed, non-endangered |
| Environment Health & Safety information |
Download
|
| Available as environmentally certified: |
May be available as PEFC™ - please contact Briggs
|
| Emissions from raw veneer: |
Zero Formaldehyde emissions (E0) and zero VOC's from raw veneer. To maintain E0 rating, specify E0 substrate and glue, and E0 water based low-VOC coating clear coat. |
| Formaldehyde statement |
Download
|
| Material Safety Data Sheet |
Download
|
This/these fire certificate(s) apply only for the MDF, species, veneers, laminates and thicknesses as listed on the certificates. Please confirm with your fire consultant that these certificates meet the relevant BCA requirements for your application (interior walls and ceilings Class 2 to 9 Buildings).