This image represents a finished sample approximately 600mm wide. The appearance of the veneer your screen, on a sample and that used in a project may differ from each other, because wood is a natural product and may vary in appearance from log to log and within a log. Veneer may have natural features such as pin knots, figure, mild-indentations, slanted/curved direction of grain, paling-fence-effect, different leaf widths, off-centred crowns etc., and manufacturing features such as join lines and knife-rub-marks. These are not defects but intrinsic features of natural wood veneer and its processing. The dyeing process used to make these veneers may accentuate such features and there may also be some colour variation between dye-batches and between logs, because different logs may take-up the stain to differing degrees.

Woodstock Brown Ash


Woodstock Brown Ash



Quarter-cut may also be available, please contact us



This veneer is normally Book-matched.
About this Product: Made by Tabu in Italy from the highest quality real wood veneer using special technology that dyes the veneer all the way through - this veneer has all the beauty, grain, depth, texture, warmth and uniqueness that can only come from using real wood, with the advantage of being available in a unique color. Suitable for all low wear and dry vertical interior applications such as furniture and panelling. The appearance of this veneer may vary because wood is a natural product and there may also be some colour variation between dye-batches. It may have natural features such as pin knots and figure.
How to Specify: Download
Nominal veneer leaf size(s): Lengths generally 2500mm up to 3100mm and sometimes 3400mm. Widths - various
Typical Finished Panel size(s): 2400mmx1200mm, 2700mmx1200mm, 3000mmx1200mm, sometimes 3300mmx1200mm
Thickness of Veneer: 0.5mm - 0.6mm
Product Data Sheet: Download
Availability: Good availability
Price zone: Above average
Applications: Suitable for interior, dry, low/medium-wear applications, situations of low or medium light, vertical and low/medium-wear horizontal applications such as wall panelling, interior doors, furniture, ceiling panels, table- and desk-tops: for where unique colours are required. It should not be used for high wear areas such as floors, stair treads, counter-tops exposed to heavy wear/water and kitchen counter-tops. Not suitable for use in high humidity, wet, steamy or damp conditions such as vanity tops, splash-backs or above stoves and dishwashers. Do not use in exterior applications, areas exposed to long periods of very bright direct or indirect light, or temperatures above 60 degrees C, or areas around stoves and fireplaces. Note that the appearance of veneer will change over time due to direct and indirect light, and exposure to heat and air, or use with unsuitable coatings. Some logs or leaves of veneer may age differently to other logs/leaves of the same type. Keep out direct sunlight. As it is not possible to cover all associated manufacturing materials, conditions, products and methods, the end-user is responsible for carrying out the necessary tests and trials to check that the veneer, coating type, fabrication methods, associated materials and cleaning products/methods are suitable for the application.
About & Applications information: Download
Colour/Appearance: Dark Brown
Consistency of Appearance: Better than average
Species: White Ash
Botanical Name: Fraxinus americana
Origin: USA veneer - EU manuf
Handling and Care instructions Download
Edging availability: Veneer edging is generally available from Briggs Veneers. Matching solid wood is not available.
Finish: Use a high quality non-yellowing 2-pack acrylic urethane designed for use with wood veneer for sealer and top coats, with manufacturer approved UV prohibitors added in the maximum amount recommended by the coating manufacturer. Sealer and coating film thickness to be as recommended by the coating manufacturer. Note that the dying process used to make these veneers may accentuate features such as pin-knots, figure, grain and join lines. Test pieces should be prepared to ensure that the coating is suitable for the application.
Pressing, Finishing & Fabrication information Download
Environmental: Sustainably managed
Environment Health & Safety information Download
Available as environmentally certified: Yes, specify as Woodstock Brown Ash FSC®
Type of environmental certification: FSC® 100% and/or FSC® Controlled
FSC Chain of Custody certificate
Emissions from raw veneer: Negligible Formaldehyde emissions (E0) and VOC's from raw veneer. To maintain E0 rating, specify E0 substrate and glue, and E0 water based low-VOC coating clear coat.
Formaldehyde certificate Download
Material Safety Data Sheet Download
Fire Hazard Group 1 not possible at this stage. Fire Hazard Group 2 when glued onto 12mm and thicker Natural-coloured and/or Pink FLAMEBLOCK FRMDF (NCC 2019 / AS 5637 / ISO 9705 Room Burn Test). Not yet certified on Black Flameblock. Download Fire Hazard Group 2 Assessment Report
Fire Hazard Group 3 when glued onto 6mm and thicker Standard MDF and Particleboard Download Fire Hazard Group 3 Assessment Report

IMPORTANT NOTICE - Briggs Fire Certificate(s)/Report(s) do not apply to FRMDF/veneers/laminates from other suppliers. They apply only to Briggs Veneers' Flameblock FRMDF/veneers/laminates/thicknesses as listed on our Fire Certificate(s)/Report(s). It is the responsibility of the end user to ensure that the products used on their project are as named on these Fire Certificate(s)/Report(s). Briggs Veneers does not accept any responsibility for product substitution by others. Do not publish Briggs Fire Certificate(s)/Report(s) on any website or in product literature as they are the property of Warrington Fire and/or Briggs Veneers. Flameblock is designed and tested to meet the National Construction Code 2019 (NCC 2019) Volume 1, Specification C1.10 Section 4 for interior walls, ceilings and lift car interiors. Flameblock is not rated for use in other areas of buildings that may require fire-retardancy such as doors, around fireplaces, etc. Nor is it rated as “non-combustible”. Panels which have been modified such as with acoustic slotting or multilayered Flameblock are not covered. Briggs Veneers are not qualified to advise what Fire Hazard Group Numbers are required for your application - please seek the advice of a Fire Engineer Consultant or Building Certifier.