loading...

This image represents a finished sample approximately 600mm wide. Colours displayed on your screen may differ from those of the actual sample.

TrueGrain Anthracite FSC®

Veneer:

TrueGrain Anthracite FSC®

Cut:

Quarter-cut

Only available in Quarter-cut type appearance

Matching:

Slip-matched

Should always be specified as Slip-matched
How to Specify: Download
Nominal veneer leaf size(s): 2500mmx640mm
Typical Finished Panel size(s): 2400mmx1200mm
Thickness of Veneer: 0.55mm
Product Data Sheet: Download
Availability: Good availability
Price zone: Above average
Applications: Ideal for use where very high colour consistency is required such as large wall and ceiling areas, or projects with multiple contracts and packages. Not to be used on exterior or wet areas, or floors. Keep out of direct sunlight.
About & Applications information: Download
Colour/Appearance: Black/Dark
- Made from dyed veneer. Very consistent in colour and grain.
Consistency of Appearance: Near perfect consistency
Made from: Dyed Poplar
Botanical Name: Populus euroamericana
Origin: Europe
Handling and Care instructions Download
Edging & solid timber availability: Veneer edging is generally available from Briggs Veneers. Matching solid wood is not available.
Finish: This veneer should be finished with a non-yellowing clear coating, such as a 2-pack Acrylic Urethane, with manufacturer approved UV inhibitors
Pressing, Finishing & Fabrication information Download
Environmental: Environmentally certified to be from responsibly managed forests, non-endangered
Environment Health & Safety information Download
Available as environmentally certified: Yes, specify as TrueGrain Anthracite FSC®
Type of environmental certification: FSC Mix®
FSC Chain of Custody certificate Download
Emissions from raw veneer: Low Formaldehyde E1
Formaldehyde certificate Download
Material Safety Data Sheet Download

FLAMEBLOCK is designed for use where Fire Hazard Group 2 fire retardant raw and veneered MDF (FRMDF) is required for interior walls and ceilings, as required by the National Construction Code (NCC) of Australia 2019. Black moisture resistant MDF is used where black substrate and panels are required for aesthetic reasons. All FLAMEBLOCK and Briggs Black MRMDF is PEFC™ certified for sustainability.

Assessment Report 23754.05 Section 5.4 shows that Briggs veneers of densities up to 755kg/m3 on 12mm+ Flameblock FRMDFare Fire Hazard Group 2.These veneers includeAmerican Walnut, White Oak, European Oak, Red Oak, Cherry, Rock Maple, Tasmanian Oak, Victorian Ash, Plantation Oak, White Ash, Hoop Pine, White Sycamore, Birch, Blackwood, Smoked Oak, Smoked Eucalypt, all the TrueGrainreconstituted veneers made from dyed veneer, the lower density TrueGrain Naturalveneers, and nearly all Woodstockand ecolignadyed veneers. This assessment was done according to AS 5637 using ISO 9705 Room Burn Tests, as required under the new National Construction Code 2019.

High density veneers such as Blackbutt, Spotted Gum, Ironbark, Jarrah, Marri, Stringybark, Sydney Blue Gum, Tallow-wood etc are not covered in this Report and so at this stage are only Group 3 on MDF or Flameblock FRMDF. Veneer laminates such as Oberflex, Innato and Shinnoki are not yet covered.

Raw Flameblock is Group 2 and veneer on Standard MDF is Fire Hazard Group 3

Fire Hazard Group Numbers in these Reports only apply to flat, un-slotted, non-routed panels. Note that we are not qualified to advise what Fire Hazard Group Numbers are required for your application - please seek the advice of a Fire Engineer Consultant or Building Certifier. Please do not put these reports on any website as they are the property of Warrington Fire. It is the responsibility of the user of all Briggs fire information, Fire Test and Assessment Reports to ensure that the products that they are applying this information to, are as described/named in the Reports. Briggs Veneers accepts no responsibility if our products are substituted.

Please contact us for New Zealand Group Numbers.

This/these fire certificate(s) apply only for the MDF, species, veneers, laminates and thicknesses as listed on the certificates. Please confirm with your fire consultant that these certificates meet the relevant BCA requirements for your application (interior walls and ceilings Class 2 to 9 Buildings).