We are open, and our warehouse and factory are operating. But we apologise that due to COVID precautions, for the moment we can only see people by appointment - please phone us on 02-97327888 or email helen@briggs.com.au. If you require samples please do not visit us, but please go to "Request sample" below or email us on samples@briggs.com.au. Thank you
loading...

This image represents a sample approximately 600mm wide. The appearance of the veneer laminate your screen, on a sample and that used in a project may differ from each other, because wood is a natural product and may vary in appearance from log to log and within a log. Veneer may have natural features such as pin knots, gum, figure, mild-indentations, slanted/curved direction of grain, paling-fence-effect, different leaf widths, off-centred crowns etc., and manufacturing features such as join lines and knife-rub-marks. These are not defects but intrinsic features of natural wood veneer and its processing.

Innato Etched Raw Oak

Product:

Innato Etched Raw Oak

Matching:

Random-matched

Available as Random-matched only
About this Product: Raw real wood veneer with a wire-brushed texture, bonded to a phenolic laminate backing sheet. Innato Raw Etched Oak requires finishing such as with a clear coating. The appearance of this veneer laminate may vary because wood is a natural product. It may have natural features such as pin knots and figure. Cannot be post-formed, but can be cold bent to a radius of 200mm along the grain.
Laminate sheet size(s): 3050mmx1220mm
Typical Finished Panel size(s): 3000mmx1200mm
Thickness of laminate: 1mm
Product Data Sheet: Download
Availability: Good availability
Price zone: Medium - Average
Applications: Unsealed, needs clear coat or paint. Suitable for use wherever wood veneers are used and a budget solution is required: for interior, dry, low/medium-wear applications, vertical and low/medium-wear horizontal applications such as wall panelling, interior doors, furniture, ceiling panels, table- and desk-tops. It should not be used for high wear areas such as floors, stair treads, counter-tops exposed to heavy wear/water and kitchen counter-tops. It is not suitable for use in high humidity, wet, steamy or damp conditions such as vanity tops, splash-backs or above stoves and dishwashers. Do not use in exterior applications, areas exposed to temperatures above 60 degrees C nor areas around stoves and fireplaces. Note that the appearance of veneer laminates may change over time due to direct and indirect light, and exposure to heat. Some sheets of veneer laminate may age differently to others. Keep out of direct sunlight. Note that wire-brushed laminates may be hard to clean. As it is not possible to cover all associated manufacturing materials, conditions, products and methods, the end-user is responsible for carrying out the necessary tests and trials to check that this product, coating types, fabrication methods, associated materials and cleaning products/methods are suitable.
About & Applications information: Download
Colour/Appearance: Neutral Pale/Mid Brown
Consistency of Appearance: Better than average
Made from: Raw (un-finished) wire-brushed American White Oak on a laminate backer
Origin: USA veneer - Asian manuf
Handling and Care instructions Download
Edging availability: Use raw Oak veneer edgebands
Finish: Raw veneer - wire-brushed texture. Should be finished with a wax, oil or other clear coating
Pressing, Finishing & Fabrication information Download
Environmental: Sustainably managed
Environment Health & Safety information Download
Available as environmentally certified: No
Emissions from laminate: Low Formaldehyde E1
Material Safety Data Sheet Download
Fire Hazard Group 1 and Group 2 not possible at this stage. Closest matching veneer that achieves Group 2 on FLAMEBLOCK is American Oak veneer
Fire Hazard Group 3 Report - tests and Assessment in progress