This image represents a sample approximately 600mm wide. The appearance of the veneer laminate your screen, on a sample and that used in a project may differ from each other. This is because wood veneer is a natural product and may vary in appearance from log to log, within a log and from leaf to leaf/across a sheet. This product may have natural features such as pin knots, gum, figure, slanted or curved direction of grain, different leaf widths, off-centred crowns etc., and manufacturing features such as join lines, brush marks, knife-rub-marks, slight indentations and some variation in the stain used to colour the veneer. These are not defects but intrinsic features of natural wood veneer, its processing and coating/finishing.

Innato Virginia Walnut


Innato Virginia Walnut



Only available in Crown-cut



Available as Book-matched only
About this Product: Sustainable real wood veneer bonded to a phenolic laminate backing sheet, finished with a tough cured clear coating. Innato retains the warmth and feel of real timber veneer, but with enhanced wear, scratch, stain, impact and moisture resistance. Innato is generally more economical to use than ordinary veneer because it is pre-finished, and pre-finishing also reduces fabrication times. The appearance of this veneer laminate may vary because wood is a natural product. It may have natural features such as pin knots and figure. Cannot be post-formed, but can be cold bent to a radius of 200mm along the grain.
Laminate sheet size(s): 3050mmx1220mm, limited availability 2440mmx1220mm
Typical Finished Panel size(s): 3000mmx1200mm, limited availability 2400mmx1200mm
Thickness of laminate: 0.8mm/1mm
Product Data Sheet: Download
Availability: Good availability
Price zone: Medium - Average
Applications: Suitable for use wherever wood veneers are used and a budget solution is required: for interior, dry, low/medium-wear applications, vertical and low/medium-wear horizontal applications such as wall panelling, interior doors, furniture, ceiling panels, table- and desk-tops. It should not be used for high wear areas such as floors, stair treads, counter-tops exposed to heavy wear/water and kitchen counter-tops. It is not suitable for use in high humidity, wet, steamy or damp conditions such as vanity tops, splash-backs or above stoves and dishwashers. Do not use in exterior applications, areas exposed to temperatures above 60 degrees C nor areas around stoves and fireplaces. Note that the appearance of veneer laminates may change over time due to direct and indirect light, and exposure to heat. Some sheets of veneer laminate may age differently to others. Keep out of direct sunlight. Note that wire-brushed laminates may be hard to clean. As it is not possible to cover all associated manufacturing materials, conditions, products and methods, the end-user is responsible for carrying out the necessary tests and trials to check that this product, fabrication methods, associated materials and cleaning products/methods are suitable.
About & Applications information: Download
Colour/Appearance: Mid/Dark Brown
Consistency of Appearance: Better than average
Made from: Pre-finished American Walnut on a laminate backer
Origin: USA veneer - Asian manuf
Handling and Care instructions Download
Edging availability: Unglued 50lm ABS edging rolls are available from Briggs
Finish: Prefinished - Gloss level approx 5%. Open-pore texture
Pressing, Finishing & Fabrication information Download
Environmental: Sustainably managed
Environment Health & Safety information Download
Available as environmentally certified: No
Emissions from laminate: Low Formaldehyde E1
Material Safety Data Sheet Download
Fire Hazard Group 1 and Group 2 not possible at this stage. Closest matching veneer that achieves Group 2 on FLAMEBLOCK is American Walnut
Fire Hazard Group 3 Report - tests and Assessment in progress