Made in France from real wood veneer bonded under ultra-high pressure to a laminate backing, with the veneer being impregnated and surfaced with a very hard cured melamine resin. Coloured stains and patterns are pre-applied to some Oberflex to create tints not achievable in ordinary veneer. Oberflex retains the appearance of real timber veneer, whilst also having very high wear, scratch, stain, impact and moisture resistance. Ideal for interior vertical and horizontal applications where high wear, scratch and stain-resistance is required such as restaurant table tops, reception counter tops and fronts, vanity doors and kitchen doors. Supplied finished (at thicknesses from 1mm to 1.2mm), Oberflex® has reduced fabrication time.
The appearance of this veneer laminate may vary because wood is a natural product. It may have natural features such as pin knots and figure, and some variation in the appearance of how stains are taken up by different leaves or logs.
Images of veneer and laminate on this page represent finished samples approximately 100mmx100mm. Colours displayed on your screen may differ from those of actual samples and from veneer or veneer laminate used on a project. Veneer and veneer laminate are made from natural wood so their appearance may vary and have natural and manufacturing features such as pin knots, gum, figure, join lines, slight indentations and some variation in the appearance of how stains/washes/tints are taken up by different leaves or logs.