This image represents a sample approximately 600mm wide. The appearance of the veneer laminate your screen, on a sample and that used in a project may differ from each other. This is because wood veneer is a natural product and may vary in appearance from log to log, within a log and from leaf to leaf/across a sheet. This product may have natural features such as pin knots, gum, figure, slanted or curved direction of grain, different leaf widths, off-centred crowns etc., and manufacturing features such as join lines, brush marks, knife-rub-marks, slight indentations and some variation in the stain used to colour the veneer. These are not defects but intrinsic features of natural wood veneer, its processing and coating/finishing. The ABS edging being made of plastic will not be a perfect match to the veneer laminate/veneer panels.
Innato Boston Crown Oak
Product: |
Innato Boston Crown Oak |
Cut: |
Crown-cut
Available in Rift-cut as Innato Ohio Rift Oak |
Matching: |
Book-matched
Available as Book-matched only |
About this Product: |
Real wood veneer bonded to a phenolic laminate backing sheet, with a wire brushed texture and finished with a cured black coating. Innato retains the warmth and feel of real timber veneer, but with enhanced wear, scratch, stain, impact and moisture resistance. Innato is generally more economical to use than ordinary veneer because it is pre-finished, and pre-finishing also reduces fabrication times. The appearance of this veneer laminate may vary because wood is a natural product. It may have natural features such as pin knots and figure. The ABS edging being made of plastic will not be a perfect match to the veneer laminate/veneer panels.. Cannot be post-formed, but can be cold bent to a radius of 200mm along the grain. |
Laminate sheet size(s): |
2440mmx1220mm, 3050mmx1220mm |
Typical Finished Panel size(s): |
2400mmx1200mm, 3000mmx1200mm |
Thickness of laminate: |
0.8mm/1mm |
Product Data Sheet: |
Download
|
Availability: |
Good availability |
Price zone: |
Medium - Average |
Applications: |
Suitable for use wherever wood veneers are used and a budget solution is required: for interior, dry, low/medium-wear applications, vertical and low/medium-wear horizontal applications such as wall panelling, interior doors, furniture, ceiling panels, table- and desk-tops. It should not be used for high wear areas such as floors, stair treads, counter-tops exposed to heavy wear/water and kitchen counter-tops. It is not suitable for use in high humidity, wet, steamy or damp conditions such as vanity tops, splash-backs or above stoves and dishwashers. Do not use in exterior applications, areas exposed to temperatures above 60 degrees C nor areas around stoves and fireplaces. Note that the appearance of veneer laminates may change over time due to direct and indirect light, and exposure to heat. Some sheets of veneer laminate may age differently to others. Keep out of direct sunlight. Note that wire-brushed laminates may be hard to clean. As it is not possible to cover all associated manufacturing materials, conditions, products and methods, the end-user is responsible for carrying out the necessary tests and trials to check that this product, fabrication methods, associated materials and cleaning products/methods are suitable. |
About & Applications information: |
Download
|
Colour/Appearance: |
Mid Brown
|
Consistency of Appearance: |
Better than average |
Made from: |
Pre-finished American White Oak on a laminate backer |
Botanical Name: |
Quercus species |
Origin: |
USA Canada |
Handling and Care instructions |
Download
|
Edging availability: |
Unglued 50lm ABS edging rolls are available from Briggs |
Finish: |
Prefinished - Gloss level approx 5%. Open-pore |
Pressing, Finishing & Fabrication information |
Download
|
Environmental: |
Sustainably managed |
Environment Health & Safety information |
Download
|
Available as environmentally certified: |
No
|
Emissions from laminate: |
Low Formaldehyde E1 |
|
|
Material Safety Data Sheet |
Download
|
Innato prefinished veneer on laminate is not fire rated.
Closest matching veneer that achieves Group 2 on FLAMEBLOCK is American Oak veneer |
|